Product family
Disc Bearings
Disc bearings use an elastomeric disc between steel plates to provide rotational capability while incorporating fixed, guided or free sliding functions as required. The structural connection, guide design, elastomer properties and corrosion protection are reviewed as a complete assembly, with inspection documentation prepared around the project quality plan.
Technical overview
Important inputs,
presented clearly.
The values below are deliberately presented as project-specific review fields. Final capacities and movements must be derived from the approved design actions, geometry and governing specification.
| Vertical load | Configured to project bearing reactions |
|---|---|
| Horizontal displacement | Free or guided movement arrangement |
| Rotation | Verified against disc and plate geometry |
| Service temperature | Specified to suit material selection |
Technical information on this page is for enquiry and discussion. It does not replace the project engineer’s approved design, drawings, product data sheet or inspection plan.
Materials & protection
Coordinate material choices with the exposure condition.
- High-performance elastomeric disc
- Machined steel plates and guides
- PTFE/stainless interface where movement is required
- Specified coating and anchor hardware
Applicable basis
Document the requirement, not a generic promise.
Where this system can fit
A bearing family
is only a starting point.
Need a data sheet?
Ask Andy for the right project documentation route.